Comparison of AC and DC charging methods
The main types of charging for electric vehicles (EVs) are alternating current (AC) and direct current (DC), which differ in terms of efficiency, speed, and impact on the grid. The following is a deta
• Product material: default 304, optional 316 and 316L seal is EPDM rubber
• Protection grade: within the specified bayonet range,with the seal ring, the protection grade can reach lP68
• Working temperature: test - 40°~105° parts to ensure no damage and normal operation of equipment
• Flame retardant grade: UL94V-2, customized vo
• Product performance: Multiple cables are locked andsealed at the same time, greatly saving space utilization
• Ordering lnstructions:
1. The default delivery does not include nuts. lf you need to purchase separately, please know
2. The default is 304 material. lf 316 is required, please changethe model suffix "- ss" to "S316"
3.The whole set includes: one set of gasket, main body, sealingring and nut;
4. The product price is (RMB: yuan/set, uSD: USD/set).
5. This product can be customized to any length. Please consult customer service for specific price.
SEVEN HOLES SIZE TABLE
| Product model | Thread size | Cable range | Thread length | Wrench Size |
| PN. | M-PG-G-NPT | mm | mm | nut/cap mm |
| MG25-H7-04-SS | M25×1.5 | 2.5~4 | 12 | 30/31 |
| MG27-H7-04-SS | M27×1.5/2.0 | 2.5~4 | 12 | 30/31 |
| MG30-H7-04-SS | M30×1.5/2.0 | 2.5~4 | 12.5 | 34/40 |
| MG32-H7-06-SS | M32×1.5 | 4~6 | 12.5 | 38/40 |
| MG32-H7-04-SS | M32×1.5 | 2.5~4 | 12.5 | 38/40 |
| MG40-H7-08-SS | M40×1.5/2.0 | 6~8 | 14 | 48/50 |
| MG42-H7-08-SS | M42×2.0 | 6~8 | 15 | 48/50 |
| MG48-H7-08-SS | M48×2.0 | 6~8 | 15 | 58/50 |
| MG50-H7-10-SS | M50×1.5 | 8~10 | 15 | 58/60 |
| PG16-H7-O2-SS | PG16 | 1.2~2.1 | 12 | 26/26 |
| PG21-H7-04-SS | PG21 | 2.5~4 | 12 | 32/31 |
| PG29-H7-06-SS | PG29 | 4~6 | 12.5 | 40/40 |
| PG29-H7-04-SS | PG29 | 2.5~4 | 12.5 | 40/40 |
| PG36-H7-08-SS | PG36 | 6~8 | 15 | 58/50 |
| PG42-H7-10-SS | PG42 | 8~10 | 15 | 60/60 |
| G1/2-H7-02-SS | G1/2 | 1.2~2.1 | 12 | 24/26 |
| G3/4-H7-04-SS | G3/4 | 2.5~4 | 12 | 30/31 |
| G1-H7-06-SS | G1 | 4~6 | 15 | 38/40 |
| G1-H7-04-SS | G1 | 2.5~4 | 15 | 38/40 |
| G1-1/4-H7-08-SS | G1-1/4 | 6~8 | 15 | 48/50 |
| G1-1/2-H7-10-SS | G1-1/2 | 8~10 | 15 | 55/60 |
| G1-1/2-H7-08-SS | G1-1/2 | 6~8 | 15 | 55/50 |
| G2-H7-12-SS | G2 | 9~12 | 15 | 71/76 |
| NPT1/2-H7-02-SS | NPT1/2 | 1.2~2.1 | 13 | 24/26 |
| NPT3/4-H7-04-SS | NPT3/4 | 2.5~4 | 13 | 30/31 |
| NPT1-H7-06-SS | NPT1 | 4~6 | 15 | 38/40 |
| NPT1-H7-04-SS | NPT1 | 2.5~4 | 15 | 38/40 |
| NPT1-1/4-H7-08-SS | NPT1-1/4 | 6~8 | 15 | 48/50 |
| NPT1-1/2-H7-10-SS | NPT1-1/2 | 8~10 | 15 | 55/60 |
| NPT1-1/2-H7-08-SS | NPT1-1/2 | 6~8 | 15 | 55/50 |
GET A QUOTE